箱式护坡模具的清理工作是非常重要的,要保证箱式护坡模具的正常运行,日常的保养工作占据着重要的作用,打好基础才能生产出质量优秀的护坡砖制品.箱式护坡模具的表面质量是非常的重要的,重点是防止锈蚀,要选用一种适合、****、专业的防锈油就尤为重要.当模具完成生产任务后,应根据不同注塑采取不同方法仔细清除残余注塑,可用铜棒、铜丝及专业模具清洗剂清除模具内残余注塑及其他沉积物,然后风干.
The cleaning work of the box type slope protection mold is very important. To ensure the normal operation of the box type slope protection mold, daily maintenance work plays an important role, and laying a solid foundation can produce high-quality slope protection brick products. The surface quality of the box type slope protection mold is very important, with the focus on preventing rust. It is particularly important to choose a suitable, * * * * *, and professional rust prevention oil. After the mold completes the production task, Different methods should be used to carefully remove residual injection molding according to different injection molding methods. Copper rods, copper wires, and professional mold cleaning agents can be used to remove residual injection molding and other deposits inside the mold, and then air dry
正常的箱式护坡模具维护惯例是等模具冷却,然后清洗模具,喷上防锈剂合模,将模具调离塑胶机台储存.下次正常注塑的时候****不必事前清洗模具,避免因大量使用模州苗木  保定电动门 保定空压机 化粪池模具 微型蠕动泵 保定强夯 收费岛模具具清洗剂增加生产成本,终端用户的意愿是只要很低的模温就可以将模具上的防锈油在做第一个产品时带走,后面打的产品表面不会再粘上模具上残留的防锈剂,这样避免很多浪费
The normal maintenance practice for box type slope protection molds is to wait for the mold to cool down, then clean the mold, spray anti rust agent to close the mold, and store the mold away from the plastic machine. The next time the mold is injected normally, there is no need to clean the mold in advance to avoid increasing production costs due to the excessive use of mold cleaning agents. The intention of end users is that as long as the mold temperature is very low, the anti rust oil on the mold can be taken away when making the first product, The surface of the products that will be printed later will no longer be coated with residual rust inhibitor on the mold, which avoids a lot of waste